Garage storage blog
Guides and design notes — everything written here comes from my own work. Newest first.
-
Guides · Nov 12, 2026
How the shelving is built: studs, braces and structural screws
Every shelf is SPF No.2 or better spruce framing lumber, cut and built on site around your door tracks in one day. Shelving is anchored into the wall studs with a diagonal brace secured by 4-inch structural screws — a minimum of 3 screws per shelf plus 2 per brace. Nothing rests on the slab and nothing hangs from the roof trusses. Each screw is rated at 412 lb of pull-out resistance (165 lb per inch of thread × 2.5 in. in the stud), per ICC-ES ESR-5300.
-
Guides · Sep 26, 2026
Single vs. double garage: which shelving layout gets the most off the floor
Single or double garage? Which shelving layout gets the most off the floor in each — one wall, two walls through the corner, or all three walls.
-
Guides · Sep 26, 2026
Structural screws vs. wood screws: what actually holds a loaded shelf
Structural screws carry a published, tested rating; wood screws don't. What that means for a loaded garage shelf, and what I use to anchor into studs.
-
Guides · Sep 26, 2026
What fits above your car — planning overhead shelving around garage door tracks
How to plan shelving around garage door tracks and the opener, so the space above your hood becomes storage and the door still runs exactly as before.
-
Guides · Sep 26, 2026
Why I don't hang garage storage from the roof trusses
Roof trusses carry your roof, not your storage. Why I never hang garage storage from them, and how wall-stud anchoring with diagonal braces works instead.