Skip to content
Toronto Garage Storage

2-wall garage shelving: two walls and the corner between them

The 2-Wall Design is 2-wall garage shelving: wood shelves along two walls of your garage, joined through the corner where they meet, built on site in one day and fully insured. The corner is the most out-of-the-way storage in a garage, and this design puts it to work.

Finished 2-wall wood garage shelving meeting in the back corner high on the walls of an empty garage, with a box and a scooter stored on topUnderside of a deep wood shelf on the side wall of a garage with a diagonal brace to a vertical post, running back to the corner by the open doorLooking up at 2-wall wood shelving in a garage: braced deep shelf overhead and a long back-wall shelf ending near the garage door trackEnd of a 2-wall wood shelf beside the house door in a garage, on a vertical post with a diagonal brace, scooter and box stored on topBright view of finished 2-wall wood garage shelving turning the back corner of a clean garage, braced at each end, box and scooter on top
Freshly built 2-wall wood garage shelving overhead in a single garage in Toronto — built on-site by Toronto Garage Storage.
Overhead wood garage shelving loaded with sleds, bins and boxes in a single garage in Toronto — built on-site by Toronto Garage Storage.

Tap a photo to open it full size.

What it costs

From $850

A standard 2-wall build of 8 ft + 8 ft, 2 ft deep, with one shelf per wall starts from $850, materials included. Each shelf is priced line by line (materials plus build hours), and the second wall costs less than the first. Each wall can be a different length.

Price your walls in the calculator

Garages it suits

  • Single garages with a free back wall and one free side wall.
  • Double garages, in the corner away from the house door.
  • Garages where the two walls are different lengths — each wall is cut to fit.

This is one of the four designs under Overhead Garage Storage, where I explain how it compares with a store-bought rack.

How it's attached

Shelving is anchored into the wall studs with a diagonal brace secured by 4-inch structural screws — a minimum of 3 screws per shelf plus 2 per brace. Nothing rests on the slab and nothing hangs from the roof trusses.

Each screw is rated at 412 lb of pull-out resistance (165 lb per inch of thread × 2.5 in. in the stud), per ICC-ES ESR-5300.

2-wall shelving questions

Why join the two walls instead of building two separate shelves?
The corner. Two separate runs leave the corner as dead space; joining both walls through it so you gain the deepest, most out-of-the-way storage in the garage.
Do the two walls have to be the same length?
No. The calculator prices each wall separately, so a long run down one wall and a short one on the other is a normal build.
CallTextEmail