Skip to content
Toronto Garage Storage

3 Garage storage shelves on 1 wall in King City

Built October 2026 · 1-Wall Design

Close-up looking up at three finished wood garage shelves on one wall in King City, each on 2x4 brackets with diagonal braces and a plywood deckFinished one-wall wood garage shelving in King City with three deep shelves stacked from near the floor to high on the wall, on braced bracketsMan hanging by his hands from the top of three finished wood garage shelves on one wall in King City, showing the braced brackets hold his weightMan lying full length on the top of three finished wood shelves on one garage wall in King City, showing the shelf supports an adult's weight1 wall, 3 shelves, in King City — garage shelving build photo 5, by Toronto Garage Storage.

Tap a photo to open it full size.

These garage storage shelves were built for a garage in King City, three shelves stacked one above the other with 2 feet of clearance between, and I built all three on site in one day. Each shelf is 6 ft long and 2 ft deep, so the wall now carries 36 square feet of shelving, the size of a small walk-in closet added to the house!

One free wall and a lot of bins

The homeowner had plenty of bins and only one garage wall to spare, so this was a garage bin storage job from the start. We worked out the layout together and began with my 1-Wall Design, which is one run of wood shelving along one wall and the simplest of my overhead garage storage designs. One wall was enough here because garage wall shelving doesn’t have to stop at a single shelf, and stacking three of them gave the bins three times the room.

How the three shelves are built

I build overhead garage organization from the top down, so the top shelf sits up high on the wall and the other two go below it, each one made the same way.

  • Each shelf has its own 2x4 shelf frame, which is fastened to the wall straight into the wall studs behind the drywall with 4-inch structural screws and never into drywall alone.
  • A 2x4 diagonal brace runs from the wall up to the front of each shelf, so the weight on the front edge goes back into the studs.
  • The surface of each shelf is premium sanded pine, cut to precisely to fit the shelf frame exactly

Nothing rests on the slab and nothing hangs from the roof trusses, and I explain why I anchor everything into the studs on How it’s built.

Garage shelving ideas from this job

Two garage shelving ideas from this job carry over to most garages, which are that one free wall is enough to start with and that the space below a top shelf can take up to two more. If your garage has a wall like that, text me a photo of it at 647-933-8110 and I’ll tell you which layout fits. The quote is free and confirmed by text in about two minutes, whether or not you book. My Overhead Garage Storage page shows the other designs I build.

Questions about this build

What are the garage storage solutions when only one wall is free?

The simplest one is what I built here, which is more than one shelf on the wall you have. For tires, bins and gear you rarely touch, one wall is usually enough, and if you’re clearing a whole garage floor the 2-Wall Design adds a second wall and the corner between them.

How many shelves can go on one wall?

I can add up to 2 shelves below the top one, which makes three on a wall, and that is what this King City wall has. How many your wall gets is something we settle when we plan your layout.

How much weight can the shelves hold?

Yes, they are rock-solid, because each structural screw that I use to mount the shelves to the wall is rated at 412 lb of pull-out resistance, and the diagonal brace carries the weight on the front edge of the shelf back into the studs. Each shelf is thus rated to around 400 lb. They are the strongest shelves on the market, and I personally weight-test each shelf.

CallTextEmail